Webcams & Webcam Adapters

ScopeTronix Webcam Adapters
Please note: the webcam adapters are threaded to accept standard 1.25" filters.

ScopeTronix IR Blocking Filter

Webcams do a great job of imaging, but they are too sensitive in the IR range. The original lens on your webcam contained an IR filter but that lens must be removed for best use with a telescope. Without an IR cutoff filter IR light can overwhelm the sensor causing blooming and over exposed areas of the image. These quality IR cutoff filters block the IR from your CCD chip allowing you to take better images with the proper exposure based on visible light. They have standard 1.25" filter threads so they thread directly into the bottom of our webcam adapters (or into the bottom of 1.25" eyepieces for eyepiece projection astrophotography). Also useful for other CCD imagers.

ScopeTronix 12mm to "T" Adapter

This adapter will allow you to mount most popular 12mm threaded webcams to any "T" threaded adapter such as a T-Mount, MaxView 40, Digi-T, etc. Allows you to use an eyepiece projection adapter or conveniently connect to a "T" threaded mount at prime focus. Top thread is male 12mm, bottom thread is female "T" thread (42mm). Works with everything that the Webcam Adapter #1 fits (see above).

MaxPower for Webcams

Telenegative amplifier lens threads directly into the filter threads on our 1.25" webcam adapters and increases magnification by 60% (1.6x). Great for getting more magnification without losing too much of the field of view. It also increases your backfocus, allowing you to reach focus on most reflectors and refractors that don't have enough focus range to focus a webcam at prime focus.

Telescopes

 

The following list contains various informations about a whole lot of telescopes and several similar products.

Digiscoping & Birding

 

In the list below you'll find any information about digiscoping & birding possibilities and product informations.

Microscopes & Acc.

 

The microscopes & acc. list will inform you about important topics all around microscopes and microscope accessoires.

Customer Quotes

"I just received the MaxView™ 40 I ordered earlier this week. I am using it with an ETX-90 and Sony DSC-F707 digital camera. I am blown away with the quality of this eyepiece. Here's a shot of the Moon taken with the MaxView™ 40. Great eyepiece, I recommend it to anyone who is in the market for a good eyepiece to use with their digital camera. Thanks for the great service as well."

– Dwight